Pitney Bowes 2030 Manual page 140

CAUTION: If your clothes get toner on them, wipe the toner off with a dry cloth,
and wash the clothes in cold water. Hot water sets toner into fabric.
CAUTION: Because the Model 2030 uses a unique Cartridge, it is recommended
that the Imaging Cartridge be ordered from Pitney Bowes Facsimile Systems.
Exclusive sensors and keying systems will not allow you to install any other type
of Imaging Cartridge. Damage to the machine may result.
WHEN THE IMAGING CARTRIDGE IS REPLACED, BE SURE TO SELECT
FEATURE 12 FROM THE OPERATOR PANEL FOR CLEANING THE PRINTER
(see next Section).
§
If replacing a cartridge, remove the
old cartridge from the unit, being sure
to grasp the middle of the cartridge
firmly. Do not touch the heater roller
in the unit, it may be very hot.
recycle the old cartridge return it in the
box the new cartridge came in. See
Section 2.1 for details.
4. Install the new Imaging Cartridge by
aligning the arrow and the projection
on both sides as shown and insert the
cartridge all the way in.
5. Close the Printer Cover firmly.
135
To