Dialing With P-Keys - Pitney Bowes 2030 Manual

4.4.6 Dialing with P-Keys

The five P-Keys (P1, P2, P3, P4 and P5) on the Model 2030 control panel allow
you to store a frequently used AutoDial Job. Once programmed, you can enter
the Job by pressing the P-Key. P-Keys can be reprogrammed with new sets of
Jobs any time and can perform other functions as well as sending to one or
several locations. See Section 5.5 for procedures on "Programming P-Keys").
To dial with a previously programmed P-Key:
Do This
1. Insert the document face down in the Automatic
Document Feeder.
2. Press the appropriate P-Key, Example: Press P3.
The system will automatically begin sending after
a 5-second pause. This pause can be eliminated
by pressing the SEND/RECEIVE key immediately.
4.4.7 Dialing by Pressing the DELAYED SEND Key (Quick AutoDial)
The Model 2030 has a DELAYED SEND key for setting up delayed or immediate;
single or multiple transmission jobs. On the Model 2030, up to 30 jobs can be
entered through the DELAYED SEND key. You can program delayed jobs by
any one of the following methods:
• random phone number entered from Numeric Keypad
• previously stored Speed Dial number entered from Numeric Keypad
• previously programmed One-Touch key
This Happens
PK3: REGIONS
The document(s) is scanned to
memory and automatically sent.
JOB#001 TO MEMORY
PAGE.1
Display
Ready mode:
AUG 10 2001 10:00
36
ENTER
DESTINATION(S)
returns to System
SYSTEM READY