Polling With Programmable Autodial Jobs - Pitney Bowes 2030 Manual

7. Enter the number corresponding to the correct
MODE and then press YES. Or just press YES for
selected mode.
8. Enter the time to send the document and then press
YES. Or just press YES to begin sending now.

5.3.2 Polling with Programmable AutoDial Jobs

To Poll (Receive) with a Programmable AutoDial Job:
Do This
1. With no documents inserted in the Automatic
Document Feeder, press FEATURES twice.
2. Press YES.
3. Since there are no pages in the Automatic
Document Feeder, the cursor will already be at #2,
and you can just press YES.
4. Enter a destination in one of the following ways:
- a random fax number from the Numeric Keypad,
- a previously stored Speed Dial number,
- a previously programmed One-Touch key.
If a mistake is made, press NO to backspace and
erase incorrect digits or use the cursor keys to
move the cursor to the incorrect digit and simply
enter the correct digit.
5. Press YES after entering the number (if you entered
a Speed Dial number, press YES a second time).
The document(s) is scanned to
memory and is automatically
sent at the time(s) specified (or
immediately if no time was
specified).
This Happens
The number appears in the
display.
65
ENTER TIME
_ _:_ _
JOB #014 TO MEMORY
PAGE.1
AUG 10 2001 10:00
SYSTEM READY
AUTO DIAL ?
ENTER YES, NO OR ts
1=SND, 2=RCV, 3=RELAY
4=SND/RCV,5=MAILBOX t t
ENTER DESTINATION#
z
ANOTHER NUMBER?
ENTER YES OR NO