Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be
retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters into the
Switch's non-volatile RAM, and then restart the Switch. All other options enter the factory
defaults into the current configuration, but do not save this configuration. Reset System will
return the Switch's configuration to the state it was when it left the factory
Reboot System
The following menu is used to restart the Switch.
Clicking the Yes click-box will instruct the Switch to save the current configuration to non-volatile RAM before restarting
the Switch.
Clicking the No click-box instructs the Switch not to save the current configuration before restarting the Switch. All of the
configuration information entered from the last time Save Changes was executed, will be lost.
Click the Restart button to restart the Switch.
Logout
Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Log Out button.
xStack DGS-3400 Series Fast Ethernet Switch
Figure 9- 2. Reset options
Figure 9- 3. Reboot System
170