Step 1: Checking The Battery Status And Verifying Operation With Twisted Pair Adapters - Fluke DTX-1800 Technical Reference Handbook

DTX Series CableAnalyzer
Technical Reference Handbook
Step 1: Checking the Battery Status and Verifying
Operation with Twisted Pair Adapters
You should check the tester and smart remote's battery
status and verify all equipment is in good working order
before going to the job site.
1-1 Connect the main and remote testers using one of the
methods shown in Figure 2-3.
1-2 Turn the rotary switch to SPECIAL FUNCTIONS.
D
1-3 Use to highlight Battery Status; then press
H I
. Press when you are done.
D
1-4 Use to highlight Self Test; then press
1-5 If fiber modules are installed in addition to twisted pair
adapters, select Mainframe.
P
1-6 Press to start the self test.
You can also check the battery status by
connecting with channel adapters and a patch
cord or by connecting through a link.
2-6
H
Note
F1 F2 F3
.
EXIT
ENTER
AUTO
TEST
SINGLE
TEST SETUP
SPECIAL
MONITOR FUNCTIONS
TALK
Figure 2-3. Battery Status and Self Test Connections for
Permanent link
adapter
Channel
adapter
TEST
SAVE
DTX-REFERENCE module
Twisted Pair Adapters
PASS
TEST
FAIL
TALK
TONE
LOW BATTERY
TEST
TALK
amd16.6eps