Fluke DTX-1800 Technical Reference Handbook page 262

DTX Series CableAnalyzer
Technical Reference Handbook
The main tester's INPUT fiber path is
not complete.
If the main tester's OUTPUT fiber is
connected to the remote's INPUT port,
the remote's TEST LED blinks.
8-54
amd103f.eps
The main tester's INPUT fiber path is
complete. The main tester's OUTPUT
fiber path is not complete.
Figure 8-26. Main Tester Results for FindFiber Test (Smart Remote Mode)
amd104f.eps
Both fiber paths are complete.
On the remote, the TEST and PASS
LEDs blink alternately.
amd105f.eps