Fluke DTX-1800 Technical Reference Handbook page 394

DTX Series CableAnalyzer
Technical Reference Handbook
twisted pair, 3-2
Patch Lengths, 8-17
permanent link
interface adapters, 1-20
test connections, 3-7
personality module, 1-23
Pin Reversal, 11-10
ping test
entering addresses, 11-4
results, 11-12
running the test, 11-11
PoE
indicator in network connectivity results, 11-8
testing for PoE, 11-6
testing through a PoE device, 4-1
Port Blink, 11-15
power
powering the tester, 1-16
specifications, 14-36
power down timer, 1-28
Power Line Frequency
coaxial setting, 5-4
twisted pair setting, 3-5
power meter, 8-57
connections, 8-58
measurement is too high or too low, 10-4
MONITOR mode, 8-58
results screens, 8-60
10
SINGLE TEST mode, 8-59
problems with the tester, 14-9
propagation delay
coaxial, 5-10
Loopback mode, 8-37
Smart Remote mode, 8-27
specifications, 14-15
twisted pair, 3-19
propogation delay
diagnosing failures, 6-4
PS ACR-F, 3-30
diagnosing failures, 6-6
test, 3-30
PS ACR-N, 3-28
PS NEXT
diagnosing test failures, 6-6
test, 3-28
PSACR. See PS ACR-N.
PSELFEXT. See PS ACR-F.
–R–
Range, 7-48
Receive Event, 7-37
receive fiber. launch/receive fiber.
referencing
coaxial, 5-1
fiber