Storage Locations And Capacities - Fluke DTX-1800 Technical Reference Handbook

Storage Locations and Capacities

All DTX Series testers can store up to 250 Cat 6 Autotest
results, including graphical data, in internal memory.
The maximum capacity of internal memory depends on the
space taken by the tester's software.
The DTX-1800 and DTX-1200 can store up to 4,000 Autotest
results, including graphical data, on a 128 MB removable
memory card.
The DTX-1800 and DTX-1200 testers can use Multi Media
Card (MMC) or Secure Digital memory cards (SD).
Chapter 13: Memory Functions
Memory cards may be lost, damaged, or
accidentally formatted, resulting in data loss.
Therefore, Fluke Networks recommends saving no
more than one day's worth of test results on a
memory card.
Checking the Memory Status
To check the memory status, turn the rotary switch to
SPECIAL FUNCTIONS, use
H
Status; then press
L
Or, press Memory from the main Autotest screen.
Figure 13-1 describes the memory status screen.
W
Caution
D
to highlight Memory
.
13-1