Testing Twisted Pair Patch Cords - Fluke DTX-1800 Technical Reference Handbook

Dtx series cable analyzer
Hide thumbs Also See for DTX-1800:
Table of Contents

Advertisement

DTX Series CableAnalyzer
Technical Reference Handbook
Permanent link
adapter
F1
F2
F3
EXIT
TEST
ENTER
SAVE
AUTO
TEST
SINGLE
TEST
SETUP
SPECIAL
MONITOR
FUNCTIONS
TALK
Figure 3-1. Twisted Pair Reference Connections for the
DTX-1800, DTX-1200, and DTX-LT
3-2
Channel
adapter
PASS
TEST
FAIL
TALK
TONE
LOW BATTERY
TEST
TALK
amd41f.eps
DTX-REFERENCE module
Figure 3-2. Twisted Pair Reference Connections for the
DTX-ELT and DTX-CLT

Testing Twisted Pair Patch Cords

Because up to 70 % of Cat 5e and Cat 6 patch cords fail to
meet TIA requirements, Fluke Networks recommends
testing patch cords before using them with your tester or in
a network.
Patch cord testing requires the optional DTX-PCU6S Patch
Cord Adapter Set. Contact Fluke Networks or visit the Fluke
Networks website for more information.
The DTX-PCU6S Patch Cord Adapter Set is not
compatible with the DTX-ELT.
Note
ezz01.eps

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtx-ltDtx-1200Dtx-cltDtx-clt certifiberDtx-elt

Table of Contents