DTX Series CableAnalyzer
Technical Reference Handbook
Using the Visual Fault Locator
Figure 9-1 shows the equipment needed for using the visual
fault locator.
1
A
Tester or smart remote with DTX-MFM2, DTX-SFM2, or
DTX-GFM2 fiber module or tester with DTX Compact
OTDR module
B
AC adapter with line cord (optional)
9-2
Figure 9-1. Equipment for Using the Visual Fault Locator
The visual fault locator port accepts connectors with
2.5 mm ferrules (SC, ST, or FC). To connect to other ferrule
sizes, use a test reference cord with the appropriate
connector at one end and a SC, ST, or FC connector at the
tester end.
2
C
One test reference cord. Match fiber and connectors to
be tested; SC, ST, or FC at tester end (optional)
D
Fiber cleaning supplies
4
3
amd61f.eps