Fluke DTX-1800 Technical Reference Handbook page 52

DTX Series CableAnalyzer
Technical Reference Handbook
1
11
10
9
8
A
The media type selected for testing.
B
Battery status icon.
C
Test Limit: The tester compares test results to the
selected limit to determine the PASS/FAIL result.
D
Cable Type: The type of cable to be tested.
1-26
2
3
4
5
7 6
amd05f.eps
Figure 1-11. The Main Autotest Screen (for Twisted Pair Media)
E
Outlet Configuration: The wire mapping used for testing twisted
pair cabling.
F
L
Press to check the memory status.
G
K
Press to view the results of the previous test.
H
If a copper adapter and a fiber module are installed, press
to change the type of media you will test.
I
Store Plot Data
•
No: Plot data is not saved, which lets you save more results.
Saved results show worst margins and worst values for each
pair.
•
Standard: The tester displays and saves plot data for
frequency-based tests such as NEXT, return loss, and
attenuation. The tester saves data for the frequency range
required by the selected test limit.
•
Extended: The tester saves data beyond the frequency range
required by the selected test limit.
J
Folder: The folder where results will be saved.
K
Operator, Site: Operator: The person using the tester and the job
site name. These are stored with saved results.
J