Renaming Results - Fluke DTX-1800 Technical Reference Handbook

DTX Series CableAnalyzer
Technical Reference Handbook

Renaming Results

To rename saved results:
1 On the View Results screen, select the result you want
to rename.
2 On the Summary screen, press
3 Enter an new ID for the result; then press
Sorting Results
You can sort the list of saved results in ascending or
descending order by the following parameters:
•
PASS/FAIL result
•
Cable ID
•
Date and time the test was completed
13-8
N
.
N
.
To sort results:
1 On the View Results screen, press
D
2 Use to highlight the field you want to sort by.
J
3 Press Ascending or
The sorting order applies only to the current folder. The
current sorting order is indicated at the top of the View
Results screen, as shown in Figure 13-2 on page 13-6.
The default order is descending by date. The sorting order
reverts to the default when you turn off the tester.
L
Sort.
L
Descending.