Creating A Custom Twisted Pair Cable Type - Fluke DTX-1800 Technical Reference Handbook

The DTX-ELT does not support custom test
settings.
On models DTX-1800, DTX-1200, and DTX-LT, you can
customize the following test settings:
•
Twisted pair cable types
•
Fiber optic cable types
•
Twisted pair test limits
•
Fiber optic test limits
•
Outlet configurations for twisted pair cable
•
NVP for twisted pair or coaxial cable
Note
Chapter 12: Custom Test Settings
Creating a Custom Twisted Pair Cable
Type
You can create up to nine custom twisted pair cable types.
A custom twisted pair cable type includes the following
settings:
•
Custom cable name
•
Baseline cable type for default values
•
Nominal velocity of propagation (NVP)
To create a custom twisted pair cable type:
Turn the rotary switch to SETUP; then select Twisted Pair.
1 Select Cable Type; then select Custom.
J
2 Press
3 On the Custom screen, select Name; then use the text
editing screen to enter a name for your custom cable
type. Press
Create.
N
when you are done.
-continued-
12-1