Fluke DTX-1800 Technical Reference Handbook page 329

The DTX serial cable connects a PC's DB-9
RS-232 serial port to the miniature RS-232 serial
port on the DTX-1800 and DTX-1200 testers. This
cable is included with the DTX-1800 and is
available from Fluke Networks. Table 14-3 on page
14-38 shows the pin connections for this cable.
4 Select Utilities > DTX Utilities > Software Update from
the LinkWare menu, locate and select the .dtx (DTX
update) file; then click Open.
5 The tester reboots, then prompts you about updating
the smart remote's software. Press
the smart remote's software.
6 To verify the update, turn the rotary switch to SPECIAL
FUNCTIONS; then select Version Information.
Note
K
OK to update
Maintenance and Specifications
PASS
TEST
FAIL
TALK
TONE
LOW BATTERY
TEST
TALK
Figure 14-1. Twisted Pair Connections for Updating the
Software with a PC
14
Maintenance
USB or
DTX RS-232
serial cable
F1 F2 F3
EXIT TEST
ENTER
SAVE
AUTO
SINGLE TEST
TEST SETUP
SPECIAL
MONITOR FUNCTIONS
TALK
amd72f.eps
14-3