Step 5: Saving The Results - Fluke DTX-1800 Technical Reference Handbook

DTX Series CableAnalyzer
Technical Reference Handbook

Step 5: Saving the Results

N
5-1 Press .
5-2 Use the text editing screen to enter a name for the
results. See Figure Figure 2-1 on page 2-3 for details on
editing text.
N
5-3 Press when you are done.
This concludes the tutorial on testing twisted pair cabling.
For more information on testing twisted pair cabling, see
Chapter 3.
2-12
Certifying Fiber Cabling
The fiber modules are not compatible with the
DTX-ELT.
This section familiarizes you with the optional DTX-MFM2,
DTX-GFM2, and DTX-SFM2 fiber modules and the DTX-CLT
CertiFiber tester by guiding you through the following
tasks:
•
Installing fiber modules
•
Checking the battery status and verifying operation
with the fiber modules
•
Setting a reference in Smart Remote mode
•
Running an Autotest in Smart Remote mode
•
Viewing the Autotest results
•
Saving the results
Required Equipment
Figure 2-7 shows the equipment for testing fiber cabling in
Smart Remote mode.
Note