Save Configuration; Print Configuration; Delete Configuration; Power-Up Configuration - Printronix T3306 Setup Manual

Save Configuration

You can save up to eight different configurations to meet different print job
requirements. See the "Saving Your New Configuration" section on
details.
Configuration 0 is a factory-preset configuration that cannot be changed or
saved.
NOTE: If the Protect Save CFG option is enabled, the new configuration will

Print Configuration

You can output a listing of various stored printer configuration parameters. You
can print the following configurations.
Current
Factory
Power-up
All
1 – 8 customized configurations
Refer to the "Printing a Configuration" section on

Delete Configuration

You can delete one or all of your eight customized configurations. Configuration 0
is a factory-preset configuration and cannot be changed or deleted.

Power-up Configuration

You can specify one of nine (0 – 8) configurations to be used upon printer
power-up. The factory default for power-up is configuration 0.

Protect Configuration

You can specify whether or not a new configuration should overwrite an existing
configuration when you activate the SAVE CONFIG option. When disabled
(default), the new configuration will overwrite the existing configuration. When
enabled, the new configuration will not overwrite the existing configuration, and
the following will be displayed:
Therefore, you must delete an existing configuration before trying to save a new
configuration.
3–32
not be saved unless the existing configuration has been deleted.
CFG FILE EXISTS
DELETE FIRST
page 3–11
page 3–16 for details.
Configuring the Printer
for