File Download; File Delete - Printronix T2N series User Manual

File Download

Use the File Download area within the File Manager to download a file. The steps are as follows:
1. View the current contents of the target Memory Device as described in File Information
(see previous section).
2. Select the target "Memory Device" in the "File Download" area.
3. Click the "Browse" button to open the Open File window.
4. Select the file for download. The filename must be in the 8.3 format or the following error
message displays.
5. Once the file is selected, the "File Name" and "File Size" is shown in their respective
boxes (see Figure 35).
6. Note the "Free Space" value in the "File Information" subsection and verify there is
adequate space available before downloading the file into the Memory Device.
7. Click "Download".
8. Update the file information using the "Get" button and verify the target file has been
successfully downloaded. The Free Space will decrement by the size of the file.
IMPORTANT: Filenames of files saved to the SD card will convert to uppercase.
Access to these files by filename is not case sensitive.

File Delete

Follow these steps to delete a file from a Memory Device via the "File Information" subsection:
1. View the contents already present in the desired Memory Device as described in File
Information (page 62).
2. Select the desired file to delete in the window.
3. Click the "Delete" button to delete the file(s).
4. After a moment, update the file information using the "Get" button and verify the target file
has successfully deleted. The Free Space will increment by the size of the file.
IMPORTANT: The File Manager will delete files from the SD card even if these files are
file protected. This includes the Premium Fonts that can be purchased from Printronix
Auto ID. DO NOT delete files from the SD card unless you are certain that these files
are no longer required.
106
Figure 35. File Download Subsection