Table of Contents
Advertisement
PC/Server Extension
4. Use a Cat5e/6 cables up to 330 feet (100 meters) long to connect the
transmitter and receiver. Plug either end of the cable into the RJ-45 LINK
ports.
1. Primary Video Output Connection:
a.
Connect the first MDCIM-DVI to the " RJ45 Port A" of MCD-DUAL by
using a standard network patch cable (Cat5e/6 UTP).
b. Plug the first MDCIM-DVI's USB and DVI connectors into the USB and
DVI ports of the first C5R-DVI-HD-RX.
c.
Connect the USB ports of the PC/server and the first C5R-DVI-HD-TX
with a USB type A-B cable.
d. Use a DVI cable to connect the DVI port of the first C5R-DVI-HD-TX and
primary DVI output port of the PC/server.
2. Secondary Video Output Connection:
a.
Connect the second MDCIM-DVI to the "RJ45 Port B" of MCD-DUAL by
using a standard network patch cable (Cat5e/6 UTP).
b. Plug the second MDCIM-DVI's DVI connector into the DVI port of the
second C5R-DVI-HD-RX.
c.
Use a DVI cable to connect the DVI port of the second C5R-DVI-HD-TX
and secondary DVI output port of the PC/server.
Chapter 6: KVM Extension
27
Advertisement
Table of Contents
