1560 Series Barcode Scanner
6.4 CONFIGURING FORMAT — DEFINE DATA FIELD
6.4.1 START POSITION
Data can be divided into fields in one of the following direction –
from head (F1) to tail (F5)
from tail (F1) to head (F5)
6.4.2 FIELD ADJUSTMENT
You may apply equal length to all fields, if necessary. If data is found longer than
specified, it will be truncated automatically. When data is found shorter, it will add
"Space" (0x20) to field.
1) Read the barcode above to adjust field by length.
2) Read the
"Decimal
3) Read the "Validate" barcode on the same page to complete this setting.
192
User Guide
Value" barcode on page 227 for the desired field length.
*From Head
From Tail
*No adjustment
Set length to adjust
fields... (*0)
End Programming Format