Setting Up A Custom Test - Avid Technology Unity LANserver EX3 Setup Manual

Appendix B Avid Performance Meter
n

Setting Up a Custom Test

92
Select the Loop option to repeat the test indefinitely. When you select
Loop
this option, the test runs until you click the Stop button in the main
utility window.
n
The Loop option causes true loop behavior — at the end of the
specified duration, the test stops, removes intermediate test
files that were created, and then restarts the test using new
intermediate test files.
3. If necessary, specify paths and file names for optional test and error log
files as follows:
a. Click the Optional Log Files button. The Optional Log Files dialog
box opens.
b. If you want to log information about the test and its results, type a
path name and a file name in the Log File text box, or click the
Browse button to search for a path name and file name.
c. If you want to log error information, type a path name and a file name
in the Error File text box, or click the Browse button to search for a
path name and file name.
If you do not want a log file, leave the Log File, Error File, or both text boxes
blank.
In addition to the standard, predefined tests, the Avid Performance Meter
allows you to configure custom tests.