Avid Technology Unity LANserver EX3 Setup Manual page 35

Connecting to an Optional KVM Switch
This section assumes you already have your keyboard, monitor, and mouse
connected to the KVM switch. This switch might be on a desktop or mounted
in a rack. You need to supply cables that are compatible with the KVM you are
using.
To connect the LANserver EX3 to a KVM switch:
1. Locate a KVM cable (customer-supplied).
2. Attach the KVM cable connector to a free connector on the back of the
KVM switch. Secure the connector with the thumbscrews on the
connector.
3. Attach the 15-pin connector on the monitor cable to the video port on the
back of the LANserver EX3. Secure the connector with the thumbscrews
on the connector.
4. Push the keyboard cable connector into the keyboard connector on the
back of the LANserver EX3. The keyboard connector is at the bottom left
of the connectors on the LANserver EX3.
5. Push the mouse cable connector into the mouse connector on the back of
the LANserver EX3. The mouse connector is directly above the keyboard
connector.
Installing the LANserver EX3 Hardware
35