Mounting Workspaces - Avid Technology Unity LANserver EX3 Setup Manual

Mounting Workspaces

# To mount a specific workspace using a fixed drive letter, add one line
# for each workspace in the following format:
#
#U: Workspace name
n
On a LANshare LANserver EX3, you can mount some MediaNetwork
workspaces to specific drive letters. The AISPortServer.ini file is used to
establish the static mapping between workspaces and drive letters.
To configure the AISPortServer.ini file:
1. Navigate to D:\Program Files\Avid Technology\AvidUnity\
PortServerStartup.
2. Open the AISPortServer.ini file using a text editor, such as WordPad.
3. Add one line for each workspace you want to map to a specific drive
letter. Each line should use the format X: workspace, where X is the drive
letter and workspace is the name of the workspace to mount. Workspace
names are case sensitive and can have no spaces in the names (see
"AISPortServer.ini File
AISPortServer.ini File Entries
The AISPortServer.ini file cannot mount workspaces that contain spaces in
their names. If a workspace you want to mount has spaces in the name, use the
Administration Tool to remove the spaces before entering its name into the
AISPortServer.ini file.
4. Save the AISPortServer.ini file.
5. Reboot the LANserver EX3 to mount the workspaces entered into the
AISPortServer.ini file.
Entries").
Mounting Workspaces
55