Avid Technology Unity LANserver EX3 Setup Manual page 106

Appendix D Using the Product Recovery CD-ROM
c
106
To set up the Windows operating system:
1. After the LANserver EX3 system reboots, the Windows 2000 Setup utility
starts and the Windows 2000 Server Setup dialog box opens showing the
License Agreement screen.
2. Click the "I accept the agreement" radio button to accept the license.
3. Click Next. The Regional Settings screen appears.
t
If you are outside the United States, customize the system and locale
settings, and the keyboard for your location.
t
If you are in the United States, continue.
4. Click Next. The Personalize Your Software screen appears.
5. Type the system administrator's name in the Name text box.
6. Type the company name in the Organization text box.
7. Click Next. The Your Product Key screen appears.
8. Type the Product Key from the Certificate of Authenticity in the Product
key text box. The certificate might be on the back of the Windows 2000
Server Getting Started Guide in the Windows software kit, or it might be
affixed to the LANserver EX3 system.
If the certificate is not already affixed to the LANserver EX3 system,
remove it from the Windows 2000 Server Getting Started Guide and affix
it now.
9. Click Next. The License Modes screen appears.
10. Do one of the following:
t
If you are working with a LANshare LANserver EX3, click the Per
Server radio button and set the number of concurrent connections to
the number of Ethernet clients the application key allows. For
example, if your application key is set for 12 Ethernet clients, set this
value to 12.
For a LANshare LANserver EX3, do not set the number of concurrent
connections to more than 20. This is the maximum number of clients that
the LANserver EX3 system can support. Setting this value to more than
20 will impact the LANserver EX3 system performance.
11. Click Next. The Computer Name and Administrator Password screen
appears.