Avid Technology Unity LANserver EX3 Setup Manual page 43

n
Avid recommends you use an administrator password to prevent unauthorized
use of the Administrator account.
13. Type the password you want to use for the Administrator account in the
Administrator Password text box.
14. Confirm the password by retyping the password in the Confirm Password
text box.
15. Click Next. The Date and Time Settings screen appears. Set the correct
date, time, and time zone for the LANserver EX3.
16. Click the "Automatically adjust clock for daylight saving changes" check
box if your location observes daylight saving time.
17. Click Next. The Network Settings screen appears.
18. Click the Typical radio button. The network settings are site dependent
and will be set later during the LANserver EX3 configuration in Chapter
3.
19. Click Next. The Workgroup and Computer Domain screen appears.
20. Click No. The workgroup and domain settings are site dependent and will
be set later during the LANserver EX3 configuration in Chapter 3. The
Performing Final Tasks screen appears, followed by the Complete the
Windows 2000 Setup Wizard screen.
21. Click Finish. The Windows 2000 operating system is loaded.
Your LANserver EX3 hardware installation is complete. Continue with
Chapter 3 to configure the LANserver EX3 and to install the LANshare
software.
Configuring the LANserver EX3 Using Windows 2000 Setup
43