Installing The Lanserver Ex3 Software - Avid Technology Unity LANserver EX3 Setup Manual

Installing the LANserver EX3 Software

16. Close all the remaining open windows and dialog boxes.
17. Click the Start button, and select Shut Down. The Shut Down Windows
dialog box opens.
18. Select Restart from the menu, and click OK. The LANserver EX3 reboots.
The MediaNetwork software allows the LANserver EX3 to share
MediaNetwork workspaces. This software is supplied on the MediaNetwork
CD-ROM in the LANserver EX3 installation kit.
To install the MediaNetwork software on the LANserver EX:
1. Locate the MediaNetwork CD-ROM.
2. Insert the CD-ROM into the LANserver EX3 CD-ROM drive. The
CD-ROM is set to auto-start and opens the Avid Unity Installation
window. This takes approximately 30 seconds.
If the CD-ROM does not auto-start, you can start the installation manually
as follows:
a. Double-click the My Computer icon on the desktop. The My
Computer window opens.
b. Right-click the CD-ROM icon, and select AutoPlay. The Avid Unity
Installation window opens.
3. Click Product Installers. The screen changes to a list of available product
installers.
4. Click LANserver Components. The screen changes to a list of available
LANserver components.
5. Click Install LANserver. The InstallShield Wizard opens and displays the
Minimum Requirements screen.
6. Click Next. The screen changes to the Welcome screen.
7. Accept the default values presented by the InstallShield Wizard. When the
Setup Status screen appears, it shows a progress indicator while the
software is being installed.
8. On the InstallShield Wizard Complete screen, click "Yes, I want to restart
my computer now."
Installing the LANserver EX3 Software
49