Henny Penny PXE-100 Operator's Manual page 65

4-4.
FILTER CONTROL
(CONT.)
March 2014
FC-38 "COOK MODE AUTO-MIX: FILL: NO
DETECT: MAX PUMP"
If the fryer pumps for this amount of time during the Fill phase
without observing a temperature rise on the upper temperature
probe, the control turns the pump off, and asks "IS POT
FILLED?". If pot is not filled completely, press "NO" and the
pump will attempt to fill further.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
FC-39 "COOK MODE AUTO-MIX: DESIRED
BOTTOM TEMP"
The purpose of the Cook Mode Auto-Mix operation is to attempt
to keep the bottom of the pot hot enough that crumbs don't stick.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
FC-40 "COOK MODE AUTO-MIX: MIN REQUIRED
OIL TEMP"
This is the minimum oil temperature required in order to activate
an Auto-Mix operation.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
FC-41 "COOK MODE AUTO-MIX: MIN REPEAT"
This setting controls how often a bottom-temperature triggered
Auto-Mix can repeat.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
57