Henny Penny PXE-100 Operator's Manual page 37

3-19.
FILTERING
INSTRUCTIONS
(CONT.)
March 2014
Polish
Option 3 allows you to polish oil.
1.
Once you have pressed 3 for "POLISH", a "CONFIRM" prompt
will appear on display. You can cancel by pressing the button
next to the X or confirm by pressing the button next to the √.
2.
Once you have confirmed YES, the drain will open automatically
and the oil will start to drain. The display will show arrows
pointing down indicating it is draining.
3.
A timer will start at the bottom left corner of the display for
15:00 minutes. This will cycle the oil until the timer expires.
4.
Once polish is complete, the display will indicate the oil is
returning to the pot.
5.
After a moment, the display will make a chirp sound and a timer
will start.
6.
Once the timer has counted down, the display will prompt "IS
Pot FILLED?"
7.
Check the oil level to confirm all oil has returned to pot. If oil is
at the correct level mark located in pot, press "YES". If oil is not
at the level marker, press "NO" and pump will continue pumping.
29