Henny Penny PXE-100 Operator's Manual page 51

4-3.
SPECIAL
PROGRAMMING
(CONT.)
Sept. 2014
SP-18 • BULK OIL SUPPLY?
1.
Use the + or - buttons to select either "YES" or "NO" for
whether or not a bulk oil supply is available for refilling the
ATO oil tank and vat with fresh oil.
SP-22 • CLEAN-OUT TYPE
This section list the two options for Clean Out Modes
•
Cold-Soak
•
Heater
1.
Use te + or - to change the options.
SP-23 • CLEAN-OUT TEMP
NOT AVAILABLE FOR COLD-SOAK OPTION
Set the desired temperature for the water during Clean Out Mode.
1.
Use the + or - to change the temperature.
SP-24 • CLEAN-OUT MINUTES
NOT AVAILABLE FOR COLD-SOAK OPTION
Set the desired time for the Clean-Out Mode.
1.
Use the + or - to change the minutes.
43