Henny Penny PXE-100 Operator's Manual page 48

4-2.
PRODUCT
PROGRAMMING
(CONT.)
March 2014
9. Press the button next to the √ to confirm complete.
10. Press the right-arrow button to advance to "LINK ID". The
Link ID is what is displayed in the cook menu. This is used as
an abbreviation or short name.
Press the button next to "<-change" to proceed with changing
the Link ID.
11. Using the buttons next to the + or - to change the letters.
Once complete, press the right-arrow button to advance to the
"COOK TIME".
12. Using the buttons next to the left set of + or - to change the
minutes in the timer. The right set of + or - are used to change
the seconds. Once complete, press the right-arrow button to
advance to "TEMP 1".
13. Using the buttons next to the + or - to change the numbers in
the temperature. Once complete, press the right-arrow button
to advance to "PRESSURE".
14. Using the buttons next to the + or - to change it to either "ON"
or "OFF". Press the right arrow to advance to the "STEP 2
AT" options.
15. "STEP 2 AT" will determine at what time the next set or
temperature and pressure settings will actipote. Use the + or
- to change the time then press the right arrow to advance to
"TEMP 2".
16. Use the + or - to adjust the temperature then press the right ar-
row to advance to "PRESSURE 2" to wither "ON" or "OFF".
17. Using the + or - buttons to select either "ON " or "OFF". Re-
peat these steps until complete cook cycle is set. One the final
pressure is set, advance to the next step.
18. Once complete, enter 0:00 in the time and this will automati-
cally be the end of the cook cycle.
40