Henny Penny PXE-100 Operator's Manual page 62

4-4.
FILTER CONTROL
(CONT.)
March 2014
FC-26 "START-UP MIX: DROP OIL: TIME"
This setting specifies how long the oil should drain during the
"Drop" phase of the Start-up Mix.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
FC-27 "START-UP MIX: FILTER: TIME"
This setting specifies how long the oil should circulated during
the "Filter" phase of the Start-up Mix,
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
FC-28 "START-UP MIX: NORMAL FILL TIME"
The expected time it takes to refill the vat at the end of a Start-up
Mix operation.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
FC-29 "START-UP MIX: FILL: NO DETECT: MAX
PUMP"
If the fryer pumps for this amount of time during the Fill phase
without observing a temperature rise on the upper temperature
probe, the control turns the pump off, and asks "IS POT
FILLED?". If pot is not filled completely, press "NO" and the
pump will attempt to fill further.
1.
Enter a new value by using the product numbers.
2.
Press the button next to √ to accept the new value.
3.
Press the button next to X to return to default or previous
setting.
54