Henny Penny PXE-100 Operator's Manual page 36

3-19.
FILTERING
INSTRUCTIONS
(CONT.)
March 2014
Daily Filter
Option 2 allows you to perform a daily filter of the oil. This filter
cycle will drain the pot completely enabling the user to clean the pot.
1.
Once you have pressed 2 for "DAILY FILTER", a "CONFIRM"
prompt will appear on display. You can cancel by pressing the
button next to the X or confirm by pressing the button next
to the √.
2.
Once you have confirmed YES, the drain will open
automatically and the oil will start to drain. The display will
show arrows pointing down indicating it is draining.
3.
As the oil is draining, a brush symbol appears to remind you to
scrub the pot. Use a brush, scrub the walls and bottom of pot. .
4.
Three prompts will appear on the display. "Fill", "Wash",
"Drain".
•
To wash all the crumbs down the drain, select the
"WASH"option and unit will start the wash cycle. Display
will show "WASHING". Once completed, display will show
previous display with options.
•
You can stop the wash cycle any time by pressing the button
next to "STOP".
5.
Once pot is scrubbed and washed, press "FILL" to return the oil
to the pot.
6.
After a few moments, the drain will close and the oil will return
to the pot. As it is close to being filled, the display will make
a chirp sound and a timer will start counting down on the lower
left hand side. The display will show arrows pointing up to show
it is filling.
7.
Once the timer has counted down, the display will prompt "IS
Pot FILLED?"
8.
Check the oil level to confirm all oil has returned to pot. If oil
is at the correct level mark located in pot, press "YES". If oil
is not at the level marker, press "NO" and pump will continue
pumping.
28