Henny Penny PXE-100 Operator's Manual page 13

1. Front casters are fixed in the forward position.
2. Pry off the rail on either side of the pallet.
3. Prop up a ramp for each caster on the selected side.
If ramp is not being used, rest the selected side's casters onto the ground and move to step 4.
4. Tilt and roll the unit off the pallet onto the ramp (if available). The front casters will slide onto the ramp.
Pull the pallet from under the unit and set the unit onto the ground.
5. Remove the weights from the pallet.
6. Remove the rear cover. The weight segments must be installed per instructions contained therein before attempting to
unlatch the lid.
Dec. 2016
Ramp Unloading
5