Henny Penny PXE-100 Operator's Manual page 50

4-3.
SPECIAL
PROGRAMMING
(CONT.)
Sept. 2014
SP-6 • AUDIO TONE (Frequency)
1.
Press the + or - to adjust the frequency setting,
2.
Press the button next to "test" on the display.
SP-7 • MELT CYCLE
Specify the desired Melt Mode heating cycle.
1.
Use the + or - to select wither "Solid" or "Liquid".
SP-8 • START-UP POLISH ENABLED?
Specify whether or not an automatic polish operation should be
performed as part of the normal, morning startup process.
1.
Use the + or - to select either "YES" or "NO".
SP-9 • START-UP GO WHERE?
Specify where the control should go after exiting Melt. Choices
are "STAY PROD", "PREV MENU", or go specifically to any of
the ten Cook Menus.
1.
Use + or - to navigate through options.
SP-10 • COOK MENUS (Cook Menu Configuration)
1.
Use the + or - buttons to navigate through cook menu
options.
• "4+TITLE"
• "5+NEXT"
• "6 ITEMS"
See MENU OPTIONS for descriptions and examples.
SP-17 • BULK DISPOSE?
1.
Use the + or - buttons to navigate through the three options:
• "NONE"
• "FRONT"
• "REAR"
2.
"NONE"- Oil dispose is by draining into a disposal cart or
shuttle.
3.
"FRONT"- Dispose by pumping through the front hose
connection by press and holding the illuminated button.
4.
"REAR"- Dispose by pumping through the rear plumbing
connection.
42