Table of Contents
Advertisement
Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Name:
Enter a name for the rule or select an application from the drop-down
menu. Select an application and click << to populate the fields.
IP Address:
Enter the IP address of the computer on your local network that
you want to allow the incoming service to. If your computer is
receiving an IP address automatically from the router (DHCP),
you computer will be listed in the "Computer Name" drop-down
menu. Select your computer and click <<.
TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open.
You can enter a single port or a range of ports. Seperate ports
with a common.
Example: 24,1009,3000-4000
Inbound Filter:
Select Allow All (most common) or a created Inbound filter. You
may create your own inbound filters in the Advanced > Inbound
Filter page.
Schedule:
The schedule of time when the Virtual Server Rule will be enabled.
The schedule may be set to Always, which will allow the particular
service to always be enabled. You can create your own times in
the Tools > Schedules section.
D-Link DIR-614 User Manual
Port Forwarding
27
Advertisement
Table of Contents
