Manually Install Red Hat Enterprise Linux 6.1 - Inspur NP5540M3 Manual

start the installation of video driver;
(10) The installation program starts to install; when the installation is completed,
click <Finish> in the interface of "InstallShield Wizard Completed" and the system
pops up a prompt that you need to restart the server so that the settings can take effect.
Take all the disks out of the drive, and select <Yes> to restart the server.
Note: in the above Video driver installation, some installation steps may be differ-
ent because of the different Windows 2008 system versions to install, please follow the
actual installation steps.
19. Install SAS controller driver
(1) Enter the Windows system, and click in turn <Start>→<Administrative
Tools>→<Computer Management>; in the interface of "Computer Management", open
"Device Manager";
(2) In the interface of "Device Manager", select the <SAS Controllers> in <Other
devices>, right click and select <Update Driver Software>;
(3) Enter the interface of "Update Driver Software". When the system asks "How
do you want to search for driver software?", please select<Browse my computer for
driver software>;
(4) The system prompts "Browse for driver software on your computer". After
putting the Inspur driver CD into the optical drive, click the <Browse> button in the
back of "Search for driver software in this location:" and select the path of the driver
in the CD: \driver\SCU\driver\win_64 (if it is 32bit system, please select \driver\SCU\
driver\win_32), and then click <OK>. Click <Next> to continue, and the system begins
to install the driver automatically.
(5) The system prompts "Windows has successfully updated your driver soft-
ware". Click <Close> to finish the installation of Intel(R) C600 Series Chipset SAS
RAID (SATA mode) driver.

6.4 Manually Install Red Hat Enterprise Linux 6.1

6.4.1 Preparation Prior to the Installation
● Installation CD for Red Hat Enterprise Linux 6.1 (1 piece of DVD)
6.4.2 Installation Steps
1. Power up and start the system, put the installation CD into the optical drive (here
taking using DVD installation disk as example), enter BIOS to set, and make the server
boot from the CD.
Chapter Six Install Operating System
49