Inspur NP5540M3 Manual page 28

Chapter Three System Setup
to change the interface functions. Refer to the following figure, and adjust the mother-
board functions.
3.2.1 How to Open the Front and Side Panel of Chassis
If motherboard jumper change is needed, please get the authorization of Inspur
Group Co., Ltd. according to the methods as follows to open the chassis front panel and
side panel:
(1) Open the front panel using the chassis key in the accessory box
(2) Open the front door and loosen the four screws as shown in the circle in the
following picture.
Loosen the four fixing screws on the chassis front panel
22