Inspur NP5540M3 Manual page 59

agree to the License Agreement" and click <Forward> to continue the installation.
22. The installation program enters "Set Up Software Updates" interface and click
<Forward> to continue the installation.
23. The installation program enters "Create User" interface. Set user name and
password to add user; click <Forward> to continue the installation.
24. The installation program enters "Date and time" interface, please set the right
time and date, and click <Forward> to continue the installation.
25. The installation program enters Kdump setting interface, please set as needed
and click <Finish> to finish the installation.
26. Input Username and Password to log in the system.
27. Install network card driver.
After the operating system installation, it will automatically load onboard network
card driver. You can use the driver CD attached with the machine to update the network
card manually.
(1) Insert Inspur driver CD into the optical drive; click the Terminal menu in
Applications→System Tools; input the following in the windows:
#cd /
#mount /dev/cdrom /mnt
#cd /mnt
#cd driver/nic/linux/82574
#cp e1000e-1.9.5.tar.gz /tmp
#cd /tmp
#tar -zxvf e1000e-1.9.5.tar.gz
#cd e1000e-1.9.5/src
#make install
#cd /
#umount /mnt
#reboot
Notes: "e1000e-1.9.5.tar.gz" is network card driver, and its version will be up-
dated. When being installed, the actual version in the attached driver CD shall prevail.)
(2) The system will automatically restart; please take out the driver CD.
(3) Log in the system, connect the network wires and configure the network.
Chapter Six Install Operating System
53