Table of Contents
Advertisement
Chapter Five SAS RAID Setup
The executable menus of the configuration interface of SAS RAID are the follow-
ing four:
● Create RAID Volume
Create RAID volume.
● Delete RAID Volume
Delete existing RAID volume.
● Reset Disks to Non-RAID
Reset HDDs in volume to non-RAID state.
● Exit
Exit the configuration interface of SAS RAID.
Ⅰ . Create RAID Volume menu
After entering the configuration interface of SAS RAID, it can select the menu
with up and down arrow keys, and then press [Enter] key to create RAID volume menu
or you can input the number key in front of the menu directly to create RAID volume
menu.
The system will display the following menu options:
Name: Please input the volume name of less than 16 characters without special
characters.
RAID Level: Please select RAID volume level. If it has not created volume at
present, there are four volumes for selection according to the number of HDDs, such as
RAID0 (Stripe),RAID1(Mirror), RAID10 (RAID0+1) and RAID5 (Parity), and please
select the levels based on the actual demand.
30
Hide quick links:
Advertisement
Table of Contents
