Table of Contents
Advertisement
Chapter Eight Instruction of Integrated Management Card Management Function
The following function menus can be found on the top of the interface: Dash-
board, FRU Information, Server Health, Configuration, Remote Control and Mainte-
nance.
1. Dashboard menu
In this menu, the information of management chip Firmware version, modification
time and MAC address, etc. can be viewed.
Click [Edit] button behind Network Information to enter network settings inter-
face. And set IP address and gateway as well as other information.
Click [Launch] behind Remote Control to log in console. When using, if prompt-
ed to install Jviewer browser, please install according to the prompt.
2. FRU Information menu
This menu displays FRU Information, including Basic Information and Server
Information two parts. Basic Information shows ID number and names of FRU device.
Server Information displays server whole machine's type, name, manufacturer and
other information. Following are the detailed information:
3. Server Health menu
In this menu, data information relating to server health including [Sensor Read-
ings], [Event Log] and [System and Audit Log] can be checked.
① Sensor Readings menu: shows all Sensor values, which are mainly tempera-
ture, voltage and fan speed. It can refresh and display according to category.
② Event Log menu: displays sensor events, BIOS events, system management
61
Hide quick links:
Advertisement
Table of Contents
