Inspur NP5540M3 Manual page 41

Notes: Before connecting the Inspur driver U disk to the computer, if your
computer is configured with standard floppy, please enter BIOS and close this
standard floppy; if your computer is connected with USB floppy, please first
disconnect USB floppy. It must guarantee that when the Inspur driver U disk is
connected to your computer, the disk character of virtual floppy driver under
Windows system shall be identified to be A:, and only by this can the subsequent
normal driver making be guaranteed.
2. Put the driver CD (Inspur system driver CD and RAID card driver CD) into
optical drive, and the driver making software will operate automatically. If the system
forbids the automatic operation of CD, please enter CD directory and operate dolphin.
bat (Inspur system driver CD) in CD or setup.exe (RAID card driver CD) in CD direc-
tory.
3. Methods for making drivers by using Inspur driver CD:
(1) After operating dolphin.bat documents, the system will enter the interface of
"Welcome to Inspur driver CD"
Chapter Six Install Operating System
35