Inspur NP5540M3 Manual page 73

Chapter Eight Instruction of Integrated Management Card Management Function
③ Remote Control Function menu
Select Server Power Control menu and enter the interface shown in the following
figure:
Select <Light on UID> option and click <Perform Action> to execute. After that,
ID light of front and back panel of corresponding server will be on.
Select <Light off UID> option and click <Perform Action> to execute. After that,
ID light of front and back panel of corresponding server will be off.
6. Maintenance menu
This function menu can realize remote update of BMC firmware and restart of
IPMI card.
① Firmware Update menu
This menu can realize remote update of IPMI management card Firmware. We
recommend users not updating it by themselves. If it really needs to be updated, the up-
date file must have been approved by us.
② Restore Factory Defaults
This menu is used to load factory default values of IPMI management card.
③ System Administrator
This menu is used to change system administrator's rights and password.
67