Manually Install Windows Server 2008 Enterprise Edition - Inspur NP5540M3 Manual

Chapter Six Install Operating System
If the disk is not partitioned, it needs to create one disk partition on the unallocat-
ed space, and then delete this newly created disk partition. And at this time the U disk
will not occupy any disk letter any more. Then create disk partition based on actual
need, and complete the installation of operating system according to the instructions.
Notes: Be sure to distinguish U disk from hard disk, and never delete or for-
mat U disk.

6.2 Manually Install Windows Server 2008 Enterprise Edition

Notes: Onboard SATA HostRAID configuration does not support Windows Server
2003 operating system.
6.2.1 Preparation Prior to Installation
● Windows Server 2003 Enterprise Edition Installation CD (here taking 64bit as
an example to introduce)
● Inspur driver CD
● Intel SATA Hostraid driver_EM64T for Windows 2003 drive
● AHCI driver_EM64T for Windows 2003 drive
● Please select to make or install the driver corresponding to the version of
system according to the operating system version selected to install.
Note: When making the above driver, if you use USB floppy, please make the
driver in the floppy disk; if you use Inspur driver U disk, please make the driver in the
Inspur driver U disk.
6.2.2 Installation Steps
1. Connect USB floppy drive or Inspur driver U disk with USB interface of server.
Power up and start the server, put the installation CD of Windows Server 2003 into the
optical drive and select to boot from CD.
2. When the system prompts "Press any key to boot from CD or DVD", press any
key, and the system will start Windows installation program from CD.
3. When the screen shows "Press F6 if you need to install a third party SCSI or
RAID driver..." please press F6 key.
When the system displays "Setup could not determine the type of one or more
mass storage...... ", press [S].
If it is ordinary SATA configuration of onboard SATA controller IDE mode, it is
no need to press any key and the system will automatically load HDD controller driver.
38