Back Panel View - Inspur NP5540M3 Manual

Built-in hard
17
disk 1 installation position
Built-in hard
18
disk 2 installation position
Built-in hard
19
disk 3 installation position
Built-in hard
20
disk 4 installation position

2.3 Back Panel View

Number
1 Power supply switch
2 Power supply input interface
3.5" hard disk configuration: install built-in 3.5"
SATA hard disk
3.5" hard disk configuration: install built-in 3.5"
SATA hard disk
3.5" hard disk configuration: install built-in 3.5"
SATA hard disk
3.5" hard disk configuration: install built-in 3.5"
SATA hard disk
Back panel view
Name
When the switch is on, the server can be
started by pressing the Power button on the
frontend of the chassis, while some optional
power supply has no this switch
For connecting the power cord (the picture
above is single power supply configuration
example)
11
Chapter Two Product Introduction
Function and Introduction