Install Outer Rail To Cabinet - Inspur NP5540M3 Manual

Chapter Nine Server Installation Guide
2. The screw holes location on chassis side that need to be corresponding to inner
rail are shown in Figure 8.
3. Make smooth face of inner rail corresponding with the side of chassis and the
holes location in inner rail corresponding with the screw holes on chassis. And also
make inner rail stay close to the chassis. And then completely fix the inner rail into
chassis through 4 round head M4*6 screws based on the location shown in Figure 9.
Repeat the above steps to install the other inner rail into the corresponding place
on other side of the chassis.

9.5 Install Outer Rail to Cabinet

1. Install the long adjustment sheet to the both sides of the outer rail and make the
groove of the long adjustment sheet face to the smooth surface of the out rail. Please
Figure 7
Figure 8
Figure 9
72