Chapter Eight Instruction Of Integrated Management Card Management Function; Management Chip Bmc Ip; Remote Login - Inspur NP5540M3 Manual

Chapter Eight Instruction of Integrated
Management Card Management Function
This product integrates IPMI management card, by which the user can remote log
in the server. The following will describe the application of management function that
management controller integrates.

8.1 Management Chip BMC IP

Onboard IPMI management card IP can be checked and set in the menu of "Server
Mgmt"→"BMC network configuration" →"Lan channel 1/2" →"Station IP address" in
the BIOS.
Notes:
Lan channel 1: refers to the multiplex management network interface, Intel 82574
network card 1.
Lan channel 2: refers to IPMI management special interface.
Please set or view IP address according to the actual use of the network card.
If you reset IP address of IPMI card, only after saving and restarting the
server or powering off (disconnecting the power) can you make it into normal use.

8.2 Remote Login

1. Remote Client System Requirements
The requirements of remote client system of GUI interface connecting to the serv-
er management chip through web browser are shown in the following table:
Requirements
Operation system
Browser plug-in module
TCP/IP network protocol stack Support TCP/IP network protocol stack
The download address of browser plug-in module:
Java SE Runtime Environment:http://www.java.com/en/download/
You can use Inspur driver CD to get and install browser plug-in module: enter
Remote web control panel/client
Support the operation system of Microsoft Inter-
net Explorer browser
Install Java SE Runtime Environment 6, Update
12 or higher version
59