Inspur NP5540M3 Manual page 51

version of 32bit or 64 bit and here taking 64bit as an example to introduce)
● Inspur driver CD
● Intel SATA Hostraid Driver_EM64T for Windows 2008 drive
● AHCI driver_EM64T for Windows 2008 drive
● Please select the corresponding driver to the made or installed version of system
according to the operating system version selected to install.
●As for the above mentioned drivers, if USB floppy drive is used, please make
the driver into floppy disk; if Inspur driver U disk is used, please make the driver into
Inspur driver U disk; if general driver U disk is used, input the disk letter occupied by
general U disk and the directory for saving the driver to make the driver into general U
disk.
6.3.2 Installation Steps
1. Connect well USB floppy drive or Inspur driver U disk or general U disk, pow-
er up to start the server, put the installation CD of Windows Server 2008 into optical
drive and then enter BIOS to configure so that the server can boot from CD.
2. Press any key when the system presents "Press any key to boot from CD or
DVD" and the system will start Windows installation program from CD.
3. According to actual needs, set Language to install, Time and currency format,
Keyboard or input method. And then click <Next> to continue.
4. In the interface of installation confirmation, click <Install now> to continue.
5. The system pops up "Load Driver" window, prompting: A Required CD/DVD
drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash
driver, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely
remove it for this step.
If USB floppy drive is used, please put the ready-made driver floppy disk into
floppy drive.
If Inspur driver U disk or general U disk is used, please confirm that there is no
problem for U disk's connection;
And then click <Browse> button, select the path of the driver and click <OK>.
The system will automatically search the driver.
6. In "Select the driver to be installed" interface, select the driver to be installed
and then click <Next> to start loading driver.
7. In "Type your product key for activation" interface, input your product key (25
Chapter Six Install Operating System
45