Inspur NP5540M3 Manual page 56

Chapter Six Install Operating System
2. The system enters the interface of "Welcome to Red Hat Enterprise Linux 6.1!".
This includes the following items:
Install or upgrade an existing system
Install system with basic video driver
Rescue installed system
Boot from local driver
You can use up and down arrow key to select items. Here we default that this is
the first installation. Select "Install or upgrade an existing system", and press [Enter] to
continue installation.
3. The system prompts Disc Found, To begin testing the media before installation
press OK.
Choose [Skip] to skip the media test and start the installation.
Here select <Skip> to skip the disk detection and press [Enter] to continue the in-
stallation.
4. The installation program goes to "RED HAT ENTERPRISE LINUX 6" inter-
face; click <Next> to continue the installation.
5. The installation program goes to "What language would you like to use during
the installation process?" interface. Select to install language version of the operating
system. Here we select "English (English)" for installation and click <Next> to con-
tinue.
6. The installation program enters "Select the appropriate keyboard for the sys-
tem" interface. Please select keyboard type according to actual situation. Here we select
"U.S. English" and click <Next> to continue the installation.
7. The installation program goes to What type of devices will your installation in-
volve?
Basic Storage Devices
Installs or upgrades to typical type of storage devices. If you're not sure which
option is right for you? This is probably it.
Specialized Storage Devices
Installs or upgrades to enterprise devices such as Storage Area Networks (SANs).
This option will allow you to add Foe/Ischia/Zech disks and to filter out devices the in-
staller should ignore.
Here we select Basic Storage Device, and click <Next> to continue the installa-
tion.
50