Install Video Driver; Install Red Hat Enterprise Linux 6.2 Manually - Inspur NF5270M3 User Manual

(10) Installation starts; after installation completes, click <Finish> according to
prompt.

18. Install video driver

After network card driver installation completes, do not exit driver CD installation
interface, and continue to install display card driver.
(1) Select in "Please select operation system" column: Windows 2008;
(2) Select in "Please select component": Video driver;
(3) Click <Next> to start installation;
(4) Enter "Welcome to the InstallShield Wizard" interface, click <Next> to
continue;
(5) Enter "License Agreement" interface, select "I accept the terms in the license
agreement", and then click <Next> to continue;
(6) Enter "Customer Information" interface, please input User Name and
Organization, and then click <Next> to continue;
(7) Enter "Setup Type" interface, please select installation type, there're two
options of "Complete" and "Complete", select "Custom" here, and click <Next> to
continue;
(8) Enter "Custom Setup" interface, click <Next> to continue;
(9) Enter "Ready to Install the Program" interface, click <Install> to install
display card driver;
(10) Installation starts and then completes, on "Install Shield Wizard Completed"
interface, please click <Finish>, a window pops up, indicating to reboot the server to
make the setting effective, take out all disks in drivers, and select <Yes> to reboot the
server.
Note: During installation of the above video driver, for different editions of
installed 08 system, some installation steps may be different, please refer to actual
installation.

5.3 Install Red Hat Enterprise Linux 6.2 Manually

5.3.1 Preparation before Installation
● Red Hat Enterprise Linux 6.2 installation CD (1 DVD, in this case it is 64bit)
● Inspur driver CD
● External RAID driver for Red Hat Enterprise Linux 6.2 (2108 RAID card does
not need driver)
Chapter Five Operation System Installation Chapter Five Operation System Installation
37