Install Inner Rail - Inspur NP5540M3 Manual

Long adjustment sheet is installed in outer rail, used to adjust the length of the
outer rail.
Short adjustment sheet is installed in the inner side of cabinet angle rail, used to
fix outer rail into cabinet angle rail.
● Metric screw package contains 18 round head M5*8 screws, 18 round head
M4*6 screws, 10 flat washers and many other screws. The following Figure 5 shows
the commonly used round head M5*8 screw, round head M4*6 screw and flat washer.
● Inner rail, middle rail and outer rail have been installed together as is shown in
Figure 6.

9.4 Install Inner Rail

1. Firstly, take inner rail out of slide rail: hold the front end of the whole slide rail
with left hand, then pull inner rail outward, when it can no be pulled again, push bayo-
net lock with finger toward the direction of arrow shown in Figure 7 and then com-
pletely pull inner rail out with uniform force.
Chapter Nine Server Installation Guide
Figure 5
Figure 6
71