Table of Contents
Advertisement
① Insert an Inspur drive CD into CD driver, in autoplay interface popped up after
running, click install or run blue dolphin icon under program option, input navigation
code on drive CD cover in Please enter navigation code interface, click [OK] to enter
installation interface automatically;
② Select in "Please select operation system" column: Windows 2008 R2;
③ Select in "Please select component" column: HCA card drive;
④ Click [Next] to install;
⑤ Enter "Welcome to the InstallShield Wizard for MLNX_VPI" interface, and
click [Next] option;
⑥ Enter "License Agreement" interface, select "I accept the terms in the license
agreement", then click [Next] to continue;
⑦ Enter "Destination Folder" interface, click [Next] to continue;
⑧ Enter "Maximum Performance" interface, click [Next] to continue;
⑨ Enter "Ready to Install Program" interface, click [Install] to continue;
⑩ Installation program start to install; after installation is done, click [Finish]
according to hints. Finish installation of HCA card drive.
3.2 Manual Installation of Red Hat Enterprise Linux 6.2
3.2.1 Preparation before Installation
● Red Hat Enterprise Linux 6.2 Installation CD (1 DVD)
3.2.2 Installation Steps
1. Power on system, insert installation CD into CD drive (taking DVD installation
drive for example), enter BIOS to set up, to enable server to boot from CD.
2. System enters Welcome to Red Hat Enterprise Linux 6.2 ！ interface, there're
the following options:
Install or upgrade an existing system
Install system with basic video driver
Rescue installed system
Boot from local driver
Use Up/Down arrow to select options, here it is the fi rst installation by default,
select "Install or upgrade an existing system", press Enter button to continue
installation.
3. System prompts Disc Found, to begin testing the media before installation press
Chapter Three Operation System Installation
23
Advertisement
Table of Contents
